Tungsten Carbide Drawing Dies Grades and Types

There are many tungsten carbide drawing dies grades and types, high quality tungsten carbide and steel armored appliances, the molded body is a high hardness, good thermal conductivity is provided, which can produce a low friction, and good corrosion resistance.

Tungsten carbide drawing dies grade :

Grade	Density(g/cm3)	Hardness(HRA)	TRS(MPa)	Applications Recommended
YG6X	14.95	91.5	1800	For drawing steel and nonferrous wires or bars of less than D 6.00mm under not so much stress.
YG6	14.95	90.5	1900	For drawing steel, nonferrous alloy bars of less than D 20.00mm under more stress and also for drawing tubes of less than D10.00mm.
YG8	14.8	89.5	2200	For drawing steel and nonferrous bars and tubes, also for manufacturing mechanical parts, tools and wear parts.
YG10	14.5	88.5	2400
YG15	14.0	87.0	2800	For drawing steel bars and tubes with a high reduction rate and for manufacturing anvils, drilling and punching and impacting.

Standard type of tungsten carbide drawing dies

Type		(OD)ΦMM	(ID)ΦMM	(H)MM
S Series	S10~S60	8~140	0.4~80	6~60
W Series	W103~W117	12~120	0.9~70	8~55
R Series	R2~R17	8~102	0.4~75	8~38
V Series	V15~V100	15~100	0.6~45	13~33

Standard type of tungsten carbide finished drawing die

Type		NIB Size (mm)			Steel Case Size(mm)
		OD	H	ID	OD	H
S Series	S10~S60	8~140	6~60	0.4~80	28~200	12~70
W Series	W103~W117	12~120	8~55	0.9~70	30~275	15~100
R Series	R2~R17	8~102	8~38	0.4~75	38~229	19~76